F.A.Q. Section
Please click on the links below to view the FAQ answers.
Why won't the letter box inside flap blow open?
The product is finely balanced - the plate is biased so that the opening force is counteracted by a greater closing force. Recent testing proved it won't blow open, and closed AGAINST an equivalent windspeed of 114 mph!(1700 pascals). Also took a good soaking with pressures of water and air at 100 pascals, without leakage. The videos on the website are very informative.
Why is it draught proof
The plate won't rattle, either by wind force or passing traffic rumbling by, thus no cold air will filter in, or no heat will escape. It'll keep you warm if your outside letter flap became faulty, or hypothetically... you didn't have one!
Why is it classed as Eco-friendly?
It will contribute towards saving energy costs. The letter box can be a "silent culprit" for losing heat. It has been quoted that up to 27% heat can be lost. From another point of view, it can be made from
recyclable material e.g. wood.
I have a favourite plate on the outside of my letter box. Will it work with this sizewise?
Yes it would. The Ecoflap is retro fitting and will accommodate post up to 260mm (10.25") wide and 42mm (approx 1.75") high.
The Ecoflap will draught proof a hole up to 80mm (over 3.125") high and over 300mm (12") wide.
My outside plate on my letter box is metal. Will it be compatible with a plastic one inside?
It will be good for! A metal plate can contribute to cold air being conducted through to the inside plate and consequently inside your house. If the inside plate is ABS - a form of plastic - it will act as a barrier having lower thermal conducting properties.
My doors bang when there is a "through" draught - will it stop this?
It will certainly help the situation. There is no direct passage of air through the plate, in either direction.
Why is it safer?
There are no springs to bite your fingers or the mail. There are no components to break.
What is the price and where is it available?
The price is £19.99 plus p&p £2.99. it's available online from this website, or by phone,email or snail mail. You'll find information by clicking the products button. Please also ask at your local hardware stores. There will be a distributor.
Why is it Simple to Use?
It is light weight and conveniently operated with one hand. It adjusts to the size of delivery and there are no components to break. The product is easily fitted having a small lip along the lower edge that rests onto your existing lower ledge of your aperture. This lines up perfectly with the outside plate. There are aesthetic screw caps, one for each corner. N.B. Screws are not supplied due to the varying depth's of doors and materials (it may be preferred to adhere the Ecoflap to the door). Recommended 3.5mm x 12/15mm countersink.
Could I paint my Ecoflap?
Very occasionally we've been asked this and feel it may be important to include here. Yes... you could. Not advisable but If you decide to, then Ecoflap must not be painted, it must be finely sprayed evenly, 3 fine coats at five minute intervals. When dry, never respray at a later time or you will most likely end up with a wrinkly rustic finish. Spraying must ONLY be on the front. The inside (back) which includes the imperative part of the function must not be changed. Plasti - Kote is the only spray recommended as this suits the material of Ecoflap. But we do not guarantee this. 100mls will do it - in fact the can could spray 2/3, so you certainly don't want to get any more. Obtainable from hardware / departments stores
.Back to top
|